特徴

  • 多数の事前定義された共振周波数
  • 要求に応じた個別の共振周波数
  • UVからLWIRまでのBBAR、R_avg < 1%(典型)
  • 様々な低RAMオプション
  • 高透過率、T>98%(典型)
  • 高効率 / 低RF駆動電力 / 高Q因子
  • 減衰された圧電および音響共振
  • 調整が容易な標準的な大口径
  • s偏光およびp偏光の光に対する取り付けオプション

代表的なアプリケーション

  • Laser Frequency Stabilisation (LFS):
  • => Pound-Drever-Hall (PDH)
  • => Frequency Modulation Spectroscopy (FMS)
  • => Phase Modulation Spectroscopy (PMS)
  • => Modulation Transfer Spectroscopy (MTS)

PDHFMMTS
Standard frequencies fo (MHz){5,10,15,20,25,50,80}{5,10,15,20,25}{3,5,10,15,20}
Frequency tolerance Δfo (MHz)+/-0.5+/-0.5+/-0.5
Tuning range (%)+/-30
Wavelength λo (nm)UV…LWIRUV…LWIRUV…LWIR
Optical transmission (%) @ λotyp. >97typ. >97typ. >97
Crystal aperture (mm²)typ. 3×3typ. 3×3typ. 3×3
Typ. Modulation depth βo (rad)1.080.6up to 3.14
Matching RF driverQDR200QDR200QDR200

以下のフォームからQUBIG製品の問い合わせが可能です。

選択可能なオプション

Wedge: +W
wedge angle: 4°
number of wedged facets: 1 (one)
AR coating: UV | … | LWIR
for RAM & etalon effect suppression
https://doi.org/10.1364/OL.41.003331
compatible with several housing types
T-control: +TXC
allows T-ctrl. & stabilisation of EOMs
for active cooling of high power models
& active RAM suppression
incl. therm. mounting, T-sensor, TEC
requires separate Temp.-controller
compatible with several housing types
DC port: +DC
Extra DC-port (SMA)
Bandwidth 0-10kHz (typ.)
for birefringence compensation,
active RAM suppression &
work point adjustment (AM)
compatible with several housing types

Brewster cut: +BC
Ref.: Optics Letters 5584 Vol. 41, No. 23
optimal RAM suppression
with & without beam displacement
aperture: D1.5mm (or D2.5mm)
EOM housing: 45x30x25mm^3
Tuning: +T
tunable resonance frequency fo
tuning range: ca. fo +/- 15% (typ.)
for precision frequency adjustment &
frequency drift compensation
extended tuning ranges available
Alignment: +AL5
Compact 5-axis stage
with X, Y, and Z linear translation &
pitch and yaw adjustment
for precision EOM/Laser alignment
compatible with several housing types

    団体名/会社名 (必須) / Company Name

    *会社名 団体名 学校名等所属先をお知らせください。





    必要なオプションがございましたらチェックマークを入れてください。(任意)